Products

Products

View as  
 
Yaw Drive Planetary Gearbox for Wind Turbine

Yaw Drive Planetary Gearbox for Wind Turbine

Yaw Drive Planetary Gearbox for Wind Turbine — 12 frame sizes, 1,000–80,000 N·m, ratios 297:1–2,153:1, IP67 triple-seal ductile iron housing for −40 °C to +60 °C sites. Gear sets are carburised and ground to HRC 58–62; a floating planet carrier holds transmission error within 0.08° under gust loading. Flange-mounted slew bearing support accepts IEC motor flanges directly, with splined or integral-pinion output options. Send your nacelle yaw moment, motor frame and site corrosion class — we return a matched 2D interface drawing and factory-direct quote within 24 hours.
PG Series Feed Mixer Planetary Gearbox

PG Series Feed Mixer Planetary Gearbox

As a local manufacturer and supplier in China, Raydafon has carefully crafted the PG Series Feed Mixer Planetary Gearbox in its own factory. The speed ratio ranges from 3:1 to 15:1. The gears are made of high-strength alloy steel. After quenching, the tooth surface hardness reaches HRC55, which is wear-resistant and impact-resistant, and can withstand a torque of 1800N・m. The box is made of cast iron and is equipped with a double sealing structure. The dust and water resistance level reaches IP65, and it can work stably in the humid and dusty environment of the farm. The factory direct supply method provides you with affordable and reliable transmission products!
PGA Series Auger Drive Planetary Gearbox for Feed Mixer

PGA Series Auger Drive Planetary Gearbox for Feed Mixer

PGA series auger drive planetary gearboxes are built for TMR feed mixers and diet feeders driven from a 540 rpm tractor PTO. Continuous torque runs from 3,810 N·m (PGA-502) to 42,000 N·m (PGA-4203/4204), with ratios from 11.1:1 to 662.8:1 and standard 1"3/8 Z6 or 1"3/4 Z20 input splines. Gears and shafts are high-strength alloy steel, gas carburized to about HRC58 tooth-surface hardness; the one-piece cast-iron housing uses dual sealing to IP65 for dust, slurry and wash-down. Manufactured by Raydafon in its own ISO 9001 workshop in Ningbo, China, for OEM mixer builders and as a replacement unit for farms and dealers. Custom ratios, output flanges and mounting faces made to drawing. Send your mixer model or drawing for a confirmed selection and quotation within 24 hours.
WPDA Series Worm Gearboxes

WPDA Series Worm Gearboxes

WPDA Series Worm Gearboxes — 13 frame sizes (40–250), ratios 5:1 to 100:1, output torque 15–2,500 N·m, input power 0.12–15 kW, IP65 cast iron housing with forced lubrication. The worm wheel is quenched and ground to HRC 58–62; a double-lip seal keeps flour dust, field silt and washdown water out of the gear cavity. Foot, flange and hollow-shaft mounting are available, and the output shaft can be machined to match your existing motor. Send your input power, required ratio and motor flange — we return a matched frame, dimensional drawing and factory-direct quote within 24 hours.
WPA Series Worm Gearboxes

WPA Series Worm Gearboxes

As a professional factory and manufacturer in China that has been deeply involved in the field of transmission equipment, Raydafon launched the WPA Series Worm Gearboxes, which are widely favored for their high cost performance. The reduction ratio of this series covers 5:1 to 100:1, the output torque reaches 10Nm-2000Nm, it is suitable for 0.06kW-15kW motors, and supports a variety of installation methods such as feet and flanges, which can easily adapt to scenarios such as material transportation and environmental protection equipment. As a reliable supplier, Raydafon provides customized services and transparent prices. The cost is 30% lower than that of imported brands with the same performance, which is the preferred solution for small and medium-sized enterprises to upgrade their equipment.
EP-NRV-F Single Solid Shaft Input Worm Gearbox

EP-NRV-F Single Solid Shaft Input Worm Gearbox

As a well-known factory and manufacturer in China in the field of professional industrial transmission equipment, Raydafon launched the EP-NRV-F single solid shaft input worm gearbox, which is an excellent worm gear reducer. The product adopts a single solid shaft input design, with a compact structure and stable operation, high torque transmission capability, and can be adapted to a variety of industrial application scenarios. Its specifications cover a variety of reduction ratio options (such as 7.5:1 to 100:1), a wide range of rated output torque (10Nm-1800Nm), input power adaptation to 0.06kW-15kW motors, and a protection level of IP55 to ensure reliable operation under harsh working conditions. As a high-quality supplier, Raydafon provides flexible customization services and highly competitive prices to meet customers' diverse needs for efficient transmission solutions.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept