Products

Products

View as  
 
Sanitation Machinery Reverse Thrust Hydraulic Cylinder

Sanitation Machinery Reverse Thrust Hydraulic Cylinder

Raydafon is a China-based OEM manufacturer and supplier of sanitation machinery reverse thrust hydraulic cylinders. This cylinder is designed as the core power unit for garbage compactors and material pushing equipment. Standard model LPE222.2.2-5-00 uses Φ220 mm bore, Φ110 mm rod, 420 mm stroke, 1110 mm installation distance, 16 MPa working pressure, 2-M22×1.5 port and 323 kg weight. The cylinder body is forged from high-strength alloy with a patented two-stage piston, reaching up to 2500 kN reverse thrust. A quadruple composite sealing system resists pH 2-12 liquids, landfill leachate and snow-melting agents. Custom bore, stroke, installation distance, port rotation and private label are available. Target pricing is typically 30%-40% below comparable imported units, depending on model and quantity. Send drawing number, required quantity and destination port for a fast quotation.
Sanitation Machinery Locking Hydraulic Cylinder

Sanitation Machinery Locking Hydraulic Cylinder

Raydafon is a China-based OEM sanitation hydraulic cylinder manufacturer and supplier. This sanitation machinery locking hydraulic cylinder is designed for garbage compactors, road sweepers and high-pressure cleaning equipment. It uses 316L stainless steel, electrolytic polishing Ra≤0.4μm, double-lip PTFE sealing with IP69K protection, and works at 25-30 MPa with stable locking under wet, dusty and corrosive conditions. Factory cycle testing confirms no leakage after 5,000 cycles on selected models. Custom bore, stroke, installation distance, port and private label are available. Target pricing is typically 30%-40% below comparable imported units, depending on model and quantity. Send drawing number, required quantity and destination port for a fast quotation.
Crane Luffing Hydraulic Cylinder

Crane Luffing Hydraulic Cylinder

Raydafon crane luffing hydraulic cylinder is the boom angle control cylinder for mobile cranes and port machinery. Reference model ZXSTC1000S.2.5-00: Φ320 bore, Φ280 rod, 4000 mm stroke, 4750 mm installation distance, 32 MPa working pressure, 3000 kN real-time dynamic thrust, 1522 kg unit weight. Body is 7-pass die-forged from aviation-grade high-strength alloy steel, double-aged to stabilize tensile strength above 1250 MPa. Triple progressive seal with Germany-imported perfluoroether rubber composite ring and 5 μm stepped dust lip. Integrated electro-hydraulic servo with ±0.03 mm magnetostrictive position feedback for 0.08 mm/s ultra-low-speed stability. 5000-hour maintenance-free cycle. Custom bore Φ50-500 mm, salt-spray and dust-resistant. MOQ 5 units, 45-60 day bulk lead time. Send crane model, thrust requirement and quantity for a quotation.
Crane Counterweight Hydraulic Cylinder

Crane Counterweight Hydraulic Cylinder

Crane counterweight hydraulic cylinder for mobile cranes and port equipment. Moves the counterweight block in real time to keep boom sway within ±1° and reduce imbalance shutdowns. Built for QAY220-class 200–220 t all-terrain cranes.

Bore Φ200 mm · Rod Φ100 mm · Stroke 180 mm · Working pressure 25 / 40 MPa · Weight 124 kg · Drawing No. QAY220.12/13A-00 · 35CrMo-class alloy steel · ISO 9001 factory · MOQ 1 pc · Custom stroke available · Quote within 24 hours.

Forklift Tilt Cylinder

Forklift Tilt Cylinder

Raydafon forklift tilt cylinder is a custom-designed hydraulic cylinder for fork mast tilt control on 1.5-18 ton forklifts. Manufactured from high-strength steel with matched piston, cylinder body, rod and seal set. Working pressure 7-14 MPa, no pressure fluctuation under load. Standard bore diameters 60-100 mm, rod diameters 25-40 mm, stroke 32-193 mm. Screw fixation and retaining ring connection allow oil seal replacement in minutes without removing the mast. Suitable for warehouse, factory and port operations. Custom bore, stroke and installation distance available for OEM forklift brands. MOQ 50 units, 25-35 day bulk lead time. Send forklift model, bore/stroke requirement and quantity for a quotation.
Forklift Lift Cylinder

Forklift Lift Cylinder

Raydafon forklift lift cylinder is the vertical lift component installed on the mast that raises and lowers the fork carriage. Manufactured from high-strength steel with a matched piston and optimized sealing ring structure. Standard models cover Φ56-60 mm bore, Φ45 mm rod, 1500-1505 mm stroke and 17.5-18.1 MPa working pressure. Advanced models include a buffer device that prevents hard impact at full stroke, protecting both the cargo and the mast structure. Compatible with electric and diesel forklifts. Five standard models from N30M300 to A2A35M300, custom bore and stroke available for OEM. MOQ 50 units, 25-35 day bulk lead time. Send forklift model, stroke requirement and quantity for a quotation.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept