China Hydraulic lift cylinder Manufacturer, Supplier, Factory

Raydafon's EP-NF75B hydraulic lift cylinder is made for lifting things like forklifts, lift platforms, and industrial handling equipment. It can be used in a lot of different ways. This industrial hydraulic lift cylinder provides strong thrust and stable performance, making it safe and effective for use in tough situations. The EP-NF75B gives reliable power to forklifts moving cargo and platforms that raise and lower lifts smoothly. Raydafon is one of the top producers of hydraulic cylinders in China. They use strong materials and precise machining technology to make hydraulic lift cylinders that last a long time and work well. We have advanced production lines and a strict quality control system at our factory in China to make sure that every hydraulic lift cylinder meets high industry standards. We can customize hydraulic lift cylinders for industrial handling equipment or heavy-duty lifting equipment to meet your specific needs. Raydafon is a reliable supplier of hydraulic lift cylinders because it has reasonable prices and great customer service. The company is dedicated to helping customers make their equipment work better and last longer.

As a powerful manufacturer and supplier in China, Raydafon's feed mixer gearbox for TMR mixer EP RMG produced in its own factory is specially designed for precision feeding! The product is suitable for EP RMG series TMR mixers, with speed ratios ranging from 3:1 to 12:1. The box body is made of thickened cast iron and can withstand a 10-ton feed mixing load. The gears are carburized and quenched, and the tooth surface hardness reaches HRC58, and the wear resistance is improved by 40%. It is equipped with imported bearings inside to support 24-hour continuous operation without jamming. From research and development to assembly, we strictly control quality throughout the process, and provide efficient and stable transmission solutions for ranches at a very competitive price!

Raydafon, a well-known chinese manufacturer, has created the Duplex Worms Gear with high cost performance by relying on the unique craftsmanship of its factory masters, and has become a trusted supplier for machinery and automation companies at reasonable prices. This worm gear is made of high-strength copper alloy and alloy steel, and has undergone seven fine grinding processes. The bite is tight and does not slip, and the transmission efficiency is 15% higher than that of ordinary products; the two-stage transmission design doubles the torque while keeping the noise lower.

Raydafon, a Chinese manufacturer and supplier, produces the EP-HH-YG45*220 Harvester Hydraulic Cylinder in our own factory. This cylinder is commonly used in the lifting and lowering systems of harvesters. It has a 45mm bore, a 220mm stroke, and can withstand pressures up to 16MPa. The chrome-plated piston rod resists wear, and the cylinder barrel is made of durable seamless steel. The seals are oil-resistant and virtually leak-proof. We carefully monitor quality from production to delivery, and the price is reasonable. Adding this hydraulic component to your harvester will make it run smoothly!

Krone round baler PTO shaft covering KR100/125/155/130/160, 1500/1800, 1500V/1250 MC and 1250/1550. Size 4 standard and Size 4 CV options use a 1210 shaft with 1.375-6 spline. Size 6 CV is available for the 1500/1800 and selected 1250/1500 builds; the 1500V/1250 MC uses 2380 or 2480 CV with 1.375-6. Clutch options include FT34 at 1,000 N·m, FT32 at 1,000 N·m, FT42 at 1,450 N·m, K64/2 cutout at 1,050 or 1,500 N·m, and FF1 at 1,000 N·m. CV base part numbers are 71R4121UCW07000 for CAT3/540 and 71R6121UCW07000 for CAT4/540, both 1.375-6. MOQ, customization and lead time are quoted per order after the baler model and existing shaft configuration are confirmed.

PGA series auger drive planetary gearboxes are built for TMR feed mixers and diet feeders driven from a 540 rpm tractor PTO. Continuous torque runs from 3,810 N·m (PGA-502) to 42,000 N·m (PGA-4203/4204), with ratios from 11.1:1 to 662.8:1 and standard 1"3/8 Z6 or 1"3/4 Z20 input splines. Gears and shafts are high-strength alloy steel, gas carburized to about HRC58 tooth-surface hardness; the one-piece cast-iron housing uses dual sealing to IP65 for dust, slurry and wash-down. Manufactured by Raydafon in its own ISO 9001 workshop in Ningbo, China, for OEM mixer builders and as a replacement unit for farms and dealers. Custom ratios, output flanges and mounting faces made to drawing. Send your mixer model or drawing for a confirmed selection and quotation within 24 hours.